Photoshop Elements > Layers >
Separate RGB Channel Layers >
3 - Make a Green Channel Layer
Use this section to create a Green channel layer.
The other channels are here:
• 2 -
Make a Red Channel
• 4
- Make a Blue Channel
• To restore the separate color channels back to color, go to
5 - Recombine RGB Channel
Layers to Color.
Be sure to check off as you go along.
Green Channel Layer
1) Make sure
the Background copy layer is active (highlighted).
If you've already used the Background copy layer for another
color channel, create a new Background copy layer.
2) Deselect the
eye icon on any existing color channel layers that you've already
made.
3)
Create a
Solid Color adjustment layer.
The Color Picker window will open.
Enter 255 in
the G: box, and click OK.
The screen will turn green.
4) Change the
blending mode of the Solid Color adjustment layer from Normal to
Multiply.
The combination of the green fill color, and the Multiply blending
mode, filters "in" the green color from Background copy layer.
You now have a green and black photograph.
5) Make sure
the Solid Color adjustment layer is active (highlighted).
6) Merge the
Solid Color adjustment layer and the Background copy layer by pressing
Ctrl + e.
7) Rename the
Background copy layer as Green.
The next two sections filter out the red and blue from the Green
layer, which was the Background copy layer.
Blue Filtering Out
1) Make a duplicate
of the Green layer.
The new layer is called Green copy.
2) Make sure
the Green copy layer is active (highlighted).
3)
Create a
Hue/Saturation adjustment layer.
The Hue/Saturation window will open.
Make the adjustments described below.
Click OK (Pre-8.0 only).
Change the Hue
to 120.
The photograph is now blue and black.
Red, green, and blue, are 120 degrees apart from each other on
the color wheel.
By changing Hue by 120 points, the hue of the Green copy layer
has been shifted from green to blue.
4) Make sure
the Hue/Saturation adjustment layer is active (highlighted).
5) Merge the
Hue/Saturation adjustment layer and the Green copy layer by pressing
Ctrl + e.
6) Rename the
merged layer as Blue.
7) Change the
blending mode of the Blue layer from Normal to Screen.
The photograph will turn cyan.
This is because the Screen blending mode is mixing the blue of
the Blue layer with the green of the Green layer.
Blue + Green = Cyan
Red Filtering Out
1) Make a duplicate
of the Blue layer.
The new layer is called Blue copy.
2) Make sure
the Blue copy layer is active (highlighted).
3)
Create a
Hue/Saturation adjustment layer.
The Hue/Saturation window will open.
Make the adjustments described below.
Click OK (Pre-8.0 only).
Change the Hue
to 120.
The photograph will turn magenta.
4) Make sure
the Hue/Saturation adjustment layer is active (highlighted).
5) Merge the
Hue/Saturation adjustment layer and the Blue copy layer by pressing
Ctrl + e.
The photograph will turn red.
6) Rename the
merged layer as Red.
7) Make sure
the blending mode of the Red layer is still Screen, not Normal.
If you don't merge the layers exactly as described above, the
blending mode may change from Screen to Normal.
Check it.
Merge the Layers
1) Press and
hold Shift, and select the Red, Blue, and Green layers.
2) Press Ctrl
+ e.
3) Rename the
merged layer as Green channel.
You now have a grayscale layer of the green channel.
Green Channel Layer
Levels Adjustment Layer
If needed,
create a Levels
adjustment layer.
The Levels window will open.
Make the adjustments described below.
Click OK (Pre-8.0 only).
Play with the sliders to adjust the exposure and contrast.
Experiment with changing the exposure and contrast of a single
color channel, by selecting Red, Green, or Blue, in the Channel
box.
Try changing the blending mode from Normal to Luminosity.
Make the Selection
1) If you wish,
to avoid distraction, use the Eraser tool to erase the portions
of the image that will not be selected.
You can erase because you're working on the duplicate of the
original.
2) Make a selection
using the Magic Wand tool.
When selecting the curls and strands of hair that extend over
the face and background, enlarge the image, and use very low tolerance
values.
Drag the Selection
1) Make sure
any selection tool is selected except the Selection Brush tool.
2) Click and
hold the selection, and drag it to the original photograph in the
project bin (photo bin).
If needed, you can add to the selection.
3) Go to Select
> Save Selection, and enter a name for the selection.
You can retrieve the selection, if you save the photograph with
the PSD file format, by going to Select > Load Selection.
